Your recipe calculation says one serving contains 152.6 calories, 7.36 grams of fat, and 183 milligrams of sodium. Those aren’t the numbers that go on your label.
FDA rules set how every value on the Nutrition Facts panel is rounded: calories to the nearest 5 or 10, fat to the nearest half gram or gram, sodium to the nearest 5 or 10 milligrams, and so on. Very small amounts can be declared as zero.
| Nutrient | Calculated | On the Label |
| Calories | 152.6 | 150 |
| Total fat | 7.36 g | 7 g |
| Saturated fat | 2.74 g | 2.5 g |
| Sodium | 183 mg | 180 mg |
| Total carbohydrate | 23.6 g | 24 g |
| Dietary fiber | 5.2 g | 5 g |
| Total sugars | 8.6 g | 9 g |
| Protein | 3.2 g | 3 g |
This guide gives you the complete rounding chart, explains each rule, and covers the mistakes that trip up most first-time labelers.
Calculate First, Round Last
The most important rule isn’t in the chart: round only the final value per serving.
Keep full precision through every step: ingredient nutrient values, recipe totals, moisture and processing loss, and the amount per serving. FDA’s database guidance recommends carrying as many decimal places as possible to avoid accumulating rounding error. Round only when you produce the number that’s printed on the label.
The regulation is explicit for calories: when you calculate calories from fat, carbohydrate, and protein, you use the actual amounts, before rounding.
The FDA Rounding Rules Chart
Calories and Macronutrients
| Nutrient | Amount per Serving | Declare As |
| Calories | Less than 5 | 0 |
| 5 to 50 | Nearest 5 | |
| More than 50 | Nearest 10 | |
| Total fat, saturated fat, trans fat | Less than 0.5 g | 0 g |
| 0.5 g to less than 5 g | Nearest 0.5 g | |
| 5 g or more | Nearest 1 g | |
| Cholesterol | Less than 2 mg | 0 mg |
| 2 to 5 mg | “Less than 5 mg” | |
| More than 5 mg | Nearest 5 mg | |
| Sodium | Less than 5 mg | 0 mg |
| 5 to 140 mg | Nearest 5 mg | |
| More than 140 mg | Nearest 10 mg | |
| Total carbohydrate, dietary fiber, total sugars, added sugars | Less than 0.5 g | 0 g |
| 0.5 g to less than 1 g | “Less than 1 g” | |
| 1 g or more | Nearest 1 g | |
| Protein | Less than 0.5 g | 0 g |
| 0.5 g to less than 1 g | “Less than 1 g” (or 1 g) | |
| 1 g or more | Nearest 1 g |
Vitamins and Minerals (Quantitative Amounts)
| Nutrient | Declare To |
| Vitamin D | Nearest 0.1 mcg |
| Calcium | Nearest 10 mg |
| Iron | Nearest 0.1 mg |
| Potassium | Nearest 10 mg |
Percent Daily Value
| Nutrient | % Daily Value Rounding |
| Fat, saturated fat, cholesterol, sodium, carbohydrate, fiber, added sugars, protein | Nearest whole percent |
| Vitamins and minerals, up to 10% | Nearest 2% |
| Vitamins and minerals, more than 10% up to 50% | Nearest 5% |
| Vitamins and minerals, above 50% | Nearest 10% |
| Vitamins and minerals, less than 2% | May be declared as 0, or marked with an asterisk |
How Each Rule Works
Calories
| Calculated | Declared |
| 3 | 0 |
| 22 | 20 |
| 23 | 25 |
| 47 | 45 |
| 96 | 100 |
| 152.6 | 150 |
The switch from 5-calorie to 10-calorie steps happens above 50.
Total Fat, Saturated Fat, and Trans Fat
All three follow the same steps: zero below 0.5 g, half grams up to 5 g, whole grams from 5 g.
| Calculated | Declared |
| 0.38 g | 0 g |
| 1.24 g | 1 g |
| 1.27 g | 1.5 g |
| 2.74 g | 2.5 g |
| 2.76 g | 3 g |
| 7.36 g | 7 g |
| 7.62 g | 8 g |
If a serving has less than 0.5 g of total fat and you make no fat or cholesterol claims, you don’t have to declare saturated fat or trans fat at all. Instead, you add a statement such as “Not a significant source of saturated fat” at the bottom of the panel.
Cholesterol
| Calculated | Declared |
| 1.5 mg | 0 mg |
| 3 mg | “Less than 5 mg” |
| 18 mg | 20 mg |
| 32 mg | 30 mg |
Sodium
The step size changes at 140 mg:
| Calculated | Declared |
| 4 mg | 0 mg |
| 63 mg | 65 mg |
| 72 mg | 70 mg |
| 183 mg | 180 mg |
| 186 mg | 190 mg |
Carbohydrate, Fiber, Sugars, and Added Sugars
All four use the same steps: zero below 0.5 g, “less than 1 g” from 0.5 g up to 1 g, and whole grams from 1 g. Added sugars follow the same gram rules as total sugars, and also get a % Daily Value based on 50 grams.
| Calculated | Declared |
| 0.3 g | 0 g |
| 0.7 g | “Less than 1 g” |
| 8.3 g | 8 g |
| 8.6 g | 9 g |
| 23.6 g | 24 g |
Protein
Protein follows the same gram steps. Between 0.5 g and 1 g, you can declare “less than 1 g,” and FDA’s Food Labeling Guide also allows 1 g. Protein % Daily Value is optional for most foods, but required if you make a protein claim or the food is for children under 4.
Vitamins and Minerals
The four required minerals and vitamins each have a declaration increment: vitamin D to the nearest 0.1 mcg, iron to the nearest 0.1 mg, and calcium and potassium to the nearest 10 mg.
Their % Daily Values round in steps that widen as the percentage grows:
| Calculated %DV | Declared |
| 1.6% | 0 (or an asterisk) |
| 5.3% | 6% |
| 12.4% | 10% |
| 13.0% | 15% |
| 58% | 60% |
Note that this differs from macronutrients: a fat %DV of 12.4% is declared as 12%, but a calcium %DV of 12.4% is declared as 10%.
How % Daily Value Is Calculated
%DV = Nutrient per Serving ÷ Daily Value × 100
For example, 180 mg of sodium against the 2,300 mg Daily Value is 7.8%, declared as 8%.
FDA lets you calculate %DV from either the declared (rounded) amount or the actual (unrounded) amount. Either is acceptable; just use one approach consistently. That’s why two correct labels for similar products can show slightly different percentages.
Why the Numbers Don’t Always Add Up
Rounded Parts Don’t Rebuild the Whole
Each value is rounded on its own. In the example at the top, fiber and sugars round to 5 g and 9 g, and other carbohydrates round separately, so you can’t reconstruct the 24 g total carbohydrate exactly from the rounded pieces.
Calories Don’t Always Match the Macronutrients
From the rounded values in our example label, you might calculate:
7 g fat × 9 + 24 g carbohydrate × 4 + 3 g protein × 4 = 171 calories
But the label says 150. That isn’t an error. Calories are calculated from unrounded values, and FDA allows several calculation methods. One subtracts non-digestible carbohydrates, such as insoluble fiber, before multiplying carbohydrate by 4. In this example:
| Component | Calculation | Calories |
| Fat | 7.36 g × 9 | 66.2 |
| Carbohydrate, minus 5.2 g insoluble fiber | 18.4 g × 4 | 73.6 |
| Protein | 3.2 g × 4 | 12.8 |
| Total | 152.6 → 150 |
Zero Doesn’t Always Mean None
Rounding lets small amounts be declared as zero:
- fewer than 5 calories → 0 calories
- less than 0.5 g fat, saturated fat, or trans fat → 0 g
- less than 2 mg cholesterol → 0 mg
- less than 5 mg sodium → 0 mg
- less than 0.5 g carbohydrate, fiber, sugars, or protein → 0 g
The nutrient may still be there. A food with 0.4 g of trans fat per serving can say “Trans Fat 0g,” and a food with a little butter in the recipe can show 0 g fat.
Two practical consequences:
- A rounded zero isn’t a “free” claim. Claims such as “fat free” or “sugar free” have their own requirements beyond the Nutrition Facts rounding.
- Never store a rounded zero as real data. If an ingredient contributes 0.42 g of fat per serving, the label shows 0 g. Double the serving size, though, and it’s 0.84 g, which declares as 1 g. If your records stored 0 instead of 0.42, the recalculation would be wrong.
The rule for anyone building or using nutrition software: store actual values, calculate with actual values, and round only for display.
Rounding Rules Are Not Compliance Tolerances
Rounding tells you how to display a value. Compliance tells you how close the actual food must be to what the label says. They’re different questions.
When FDA tests a product, it compares the lab result with the label. In general:
- Calories, sugars, total fat, saturated fat, cholesterol, and sodium can’t exceed the declared value by more than 20%.
- Naturally occurring nutrients such as protein, fiber, vitamins, and minerals must be at least 80% of the declared value.
- Nutrients added through fortification must be at least 100% of the declared value.
Correct rounding won’t save a label built on inaccurate ingredient data.
Common Rounding Mistakes
- printing raw calculator values, such as “152.6 calories” or “183 mg sodium”
- rounding ingredients or intermediate steps instead of only the final value
- using the same increment for every nutrient
- missing the change at 50 calories or 140 mg sodium
- rounding vitamin and mineral %DVs to whole percents
- calculating calories from rounded macronutrients
- storing rounded zeros as real data
- reading a rounded zero as permission to make a “free” claim
- confusing rounding rules with compliance tolerances
How FreeFoodLabels.com Handles Rounding
FreeFoodLabels.com calculates your recipe’s nutrition and applies FDA’s rounding rules when it generates your Nutrition Facts panel, so you don’t have to memorize the chart.
Your inputs still matter. Rounding can’t correct a wrong ingredient, a wrong quantity, a missing moisture- or processing-loss figure, or a wrong serving size, so review those before you rely on the label.
It’s free, with no account required. A free account lets you save your recipes and use recipe costing.
Create your Nutrition Facts label
Frequently Asked Questions
Does FDA require Nutrition Facts values to be rounded?
Yes. 21 CFR 101.9 sets the declaration increment for every nutrient, and the increment often depends on the amount present.
How are calories rounded?
Below 5 calories, declare 0. From 5 to 50, round to the nearest 5. Above 50, round to the nearest 10.
When can a label say 0 g fat?
When a serving contains less than 0.5 g of total fat.
How is sodium rounded?
Below 5 mg, declare 0 mg. From 5 to 140 mg, round to the nearest 5 mg. Above 140 mg, round to the nearest 10 mg.
How are carbohydrates, sugars, and fiber rounded?
Below 0.5 g, declare 0 g. From 0.5 g to less than 1 g, declare “less than 1 g.” From 1 g up, round to the nearest gram.
How are vitamin and mineral % Daily Values rounded?
To the nearest 2% up to 10%, the nearest 5% from 10% to 50%, and the nearest 10% above 50%. Below 2%, they can be declared as 0 or marked with an asterisk.
Should I calculate % Daily Value from rounded or unrounded amounts?
Either. FDA allows %DV to be calculated from the declared amount or the actual amount. Use one method consistently.
Why does my label say 0 g when the food contains some of the nutrient?
Small amounts below FDA’s thresholds can be declared as zero. A displayed zero doesn’t always mean the nutrient is completely absent.
Should I round each ingredient before calculating the recipe?
No. Keep full precision through the whole calculation and round only the final per-serving values.
Why don’t the numbers on my label add up?
Each value is rounded separately, and calories are calculated from unrounded amounts, sometimes with fiber subtracted. Rebuilding totals from rounded label values won’t match exactly.
Are rounding rules the same as compliance tolerances?
No. Rounding governs how values are displayed. Compliance tolerances govern how close the actual food must be to the label.
References
- 21 CFR 101.9(c). Nutrition labeling of food: nutrient declarations and rounding.
- FDA. Food Labeling Guide (Appendix H: Rounding the Values According to FDA Rounding Rules).
- FDA. Guide for Developing and Using Data Bases for Nutrition Labeling.
- FDA. Industry Resources on the Changes to the Nutrition Facts Label.
- ESHA Research. Rounding Rules for Label Nutrients (U.S.) (vitamin and mineral quantitative increments).
This article provides general information about U.S. food labeling and isn’t legal or regulatory advice. FDA requirements can change, and special rules or exemptions may apply to particular foods. You’re responsible for making sure your labels comply with current regulations. Consult 21 CFR 101.9, current FDA guidance, or a qualified food-labeling professional when necessary.
