Skip to main content
Uncategorized

How to Make a Nutrition Facts Label from a Recipe

By October 24, 2026October 30th, 2026No Comments13 min read

Making a Nutrition Facts label from a recipe takes more than adding up the calories in the ingredients. You need reliable ingredient data, exact quantities, realistic moisture-loss and processing-loss figures, the correct serving size, and FDA-compliant rounding.

This guide walks through turning a commercial recipe into a U.S. Nutrition Facts label, using a batch of granola as the example, and shows where FreeFoodLabels.com fits in.

Two things to know first:

  • The Nutrition Facts panel is only part of the label. Most packaged foods also need a statement of identity, net quantity of contents, an ingredient statement, an allergen declaration when applicable, and the name and address of the responsible business.
  • This guide covers U.S. labeling only. FreeFoodLabels.com currently supports U.S. nutrition calculations and labels. Canadian and other international formats are planned.

Step 1: Standardize the Recipe

Start with the recipe you actually use in production, not an informal kitchen version or an old development formula. Record:

  • every ingredient and its exact amount
  • complete sub-ingredients for compound ingredients
  • units of measure
  • moisture loss and processing loss
  • intended package size
  • serving size, if known

Use weights, not volumes. A cup of flour, chopped nuts, or grated cheese varies depending on how it’s filled. Grams and ounces make a formula reproducible and easier to calculate.

If the recipe started as a test batch, confirm that the production formula uses the same proportions. Scaling up can change evaporation, equipment loss, mixing, and finished yield.

Step 2: Match Every Ingredient to Reliable Nutrition Data

Your label is only as accurate as your ingredient data. Good sources include:

  • USDA food-composition data
  • supplier specification sheets
  • laboratory results
  • verified custom ingredient records

Choose the entry that best matches the ingredient you actually use. “Tomatoes” could mean raw tomatoes, canned tomatoes with liquid, drained tomatoes, tomato puree, or a supplier’s prepared product, and each has different nutrition.

Be careful with a supplier’s Nutrition Facts panel. Those values have already been rounded under FDA rules, so they’re less precise than a specification sheet. If a supplier panel is all you have, ask the supplier for unrounded values.

In FreeFoodLabels.com, search for the ingredient and review the record before selecting it; don’t just take the first result. If nothing matches, create a custom ingredient using verified supplier or other reliable data.

Step 3: Enter Exact Ingredient Quantities

Enter every ingredient in the batch, including salt, oil, coatings, and anything added in small amounts. Small ingredients can have a big effect on sodium, fat, and added sugars.

Here’s our granola:

IngredientBatch Amount
Rolled oats5,000 g
Almonds1,000 g
Honey900 g
Vegetable oil350 g
Brown sugar300 g
Cinnamon25 g
Salt20 g
Total7,595 g

The ingredients weigh 7,595 grams going in, but you won’t pack 7,595 grams. Baking drives off water, and some product is lost along the way.

Step 4: Measure Moisture Loss and Processing Loss

A batch loses weight in two different ways, and they affect the label differently. FreeFoodLabels.com has a separate field for each.

Moisture LossProcessing Loss
What it isWater that evaporates during cooking, baking, or dryingProduct lost in handling: stuck to equipment, spilled, trimmed, or rejected
NutrientsStay in the productLeave with the lost product
Effect on nutrition per gramGoes up, because the same nutrients are in less weightNo change
Effect on yieldFewer grams of finished productFewer grams of finished product

Lumping the two together is a common mistake. If you count spilled product as evaporated water, your label will overstate calories and nutrients.

To measure both, weigh the batch three times:

  1. Ingredients going in: 7,595 g
  2. Right after cooking and cooling, before any packing losses: 7,250 g
  3. Usable finished product, after normal handling and packing: 7,100 g

Then calculate each loss:

LossCalculationResult
Moisture loss(7,595 − 7,250) ÷ 7,5954.5%
Processing loss(7,250 − 7,100) ÷ 7,2502.1%

Enter 4.5% as moisture loss and 2.1% as processing loss. The moisture loss concentrates the granola’s nutrients into 7,250 grams. The processing loss reduces the batch to 7,100 usable grams without changing the nutrition in each gram.

Two cautions:

  • Use representative batches, not an unusually good or bad one. Averaging several batches is better.
  • Draining or discarding fat, solids, or nutrient-rich liquid changes nutrition in ways a simple percentage can’t capture. Those recipes may need additional adjustment or laboratory validation.

Step 5: Determine the Serving Size

A serving size isn’t the amount you’d like customers to eat. FDA bases serving sizes on the Reference Amount Customarily Consumed (RACC) for your product’s category, set out in 21 CFR 101.12.

Granola eaten as a breakfast cereal falls under ready-to-eat cereals weighing 43 grams or more per cup, which have a RACC of 60 grams. The label serving size is the household measure (cup, tablespoon, piece, slice) closest to the RACC, followed by its metric weight. If our granola weighs about 110 grams per cup, 1/2 cup (55 g) is the closest common measure.

With a finished batch of 7,100 grams:

7,100 g ÷ 55 g = about 129 servings

Package size matters, too. A package containing 200% to 300% of the RACC generally needs a dual-column label showing both per-serving and per-package values.

Confirm the correct RACC category before finalizing your label. Similar products don’t always share the same reference amount, and a granola marketed as a snack may fall in a different category than one sold as cereal.

Step 6: Calculate Nutrients per Serving

Recipe-analysis software:

  1. calculates each ingredient’s nutrient contribution
  2. adds them up for the batch
  3. adjusts for moisture loss, which concentrates the nutrients
  4. adjusts for processing loss, which removes product and its nutrients together
  5. allocates the result to one serving

In simplified form:

Nutrient per Serving = Total Nutrient in Cooked Batch × Serving Weight ÷ Cooked Batch Weight

Because processing loss doesn’t change the nutrition per gram, the calculation uses the cooked weight, before handling losses.

For example, the 20 grams of salt in our granola contain about 7,750 mg of sodium. After baking, that sodium is spread across 7,250 grams of granola, or about 59 mg per 55 g serving from salt alone, before the small amounts of sodium in the oats, honey, and other ingredients. (If you mistakenly treated all 495 grams of loss as moisture, you’d divide by 7,100 grams instead and slightly overstate every nutrient.)

Review every result for surprises. An unexpected number may be correct, but it can also point to the wrong ingredient, unit, decimal place, or loss percentage.

Pay particular attention to:

  • Added sugars. Total sugars and added sugars aren’t the same. In our granola, the honey and brown sugar count as added sugars; the naturally occurring sugars in the oats and almonds don’t.
  • Dietary fiber. Not every ingredient marketed as fiber qualifies as dietary fiber under FDA rules.
  • Supplier-specific nutrients, which may differ from generic database entries.

Step 7: Apply FDA Rounding Rules

The numbers from your recipe calculation aren’t always the numbers on the label. FDA rules specify how calories, fat, sodium, carbohydrates, sugars, vitamins, minerals, and other values are rounded. For example, sodium between 5 and 140 mg is rounded to the nearest 5 mg, so the granola’s 59 mg would be declared as 60 mg.

Keep two values separate:

  • Unrounded value: the result of the recipe calculation
  • Declared value: the number printed on the label after rounding

Always calculate from unrounded values, never from rounded label values. FreeFoodLabels.com applies the display rules when it generates the panel, but your business remains responsible for the accuracy of the inputs and the final review.

Your label has to hold up to testing. FDA checks label accuracy by laboratory analysis, and values calculated from databases are held to the same compliance standards as lab results. For example, calories, sugars, fat, and sodium generally can’t exceed the declared value by more than 20%, and naturally occurring nutrients like fiber, vitamins, and minerals generally must be at least 80% of the declared value. That’s one more reason to use accurate ingredient data and realistic loss figures.

Step 8: Choose the Right Nutrition Facts Format

The standard vertical panel isn’t the only FDA format. Depending on package size and configuration, a tabular, linear, dual-column, or other permitted format may apply.

These aren’t design choices. Your package and product determine which formats you can use. After placing the panel in your package artwork, confirm it’s legible and correctly proportioned. Don’t stretch it or rebuild it in a way that changes the required formatting.

Step 9: Generate the Rest of the Label Information

Along with the Nutrition Facts panel, FreeFoodLabels.com generates:

  • An ingredient statement. Check it against your formula and supplier documents. Ingredients are listed in descending order by weight, and compound ingredients may need their sub-ingredients listed.
  • Allergen declarations. U.S. law recognizes nine major food allergens: milk, eggs, fish, crustacean shellfish, tree nuts, peanuts, wheat, soybeans, and sesame. Our granola’s almonds, for instance, must be declared as a tree nut. Automated allergen detection is a useful check, but it doesn’t replace verifying each ingredient with your suppliers, because names, sub-ingredients, and formulations change.
  • A net weight declaration. Confirm it matches what actually goes into the package and is presented correctly on the finished artwork.

Step 10: Review and Document the Finished Label

Before printing packaging, confirm that:

  • the recipe matches the current production version
  • every ingredient and sub-ingredient is included
  • ingredient records and units are correct
  • moisture loss and processing loss are measured separately and reflect actual production
  • the serving size uses the correct RACC category
  • added sugars and dietary fiber are supported
  • the ingredient statement matches the formula
  • allergens are properly declared
  • net quantity and business information are correct
  • any voluntary claims meet their own requirements

A good-looking panel doesn’t qualify you for a claim. Claims like “low sodium,” “sugar free,” and “good source of fiber” each have specific requirements that must be met separately.

Keep records of your formula, ingredient sources, supplier documents, moisture- and processing-loss measurements, serving-size rationale, unrounded calculations, and the approved label. Recalculate the label whenever an ingredient, supplier specification, formula, process, package, or serving size changes.

Do You Need Laboratory Testing?

Not necessarily. Many conventional foods can be labeled using database analysis, as long as the ingredient data and production assumptions accurately represent the finished product.

Laboratory analysis may be worth it when:

  • processing changes are difficult to model
  • raw materials vary significantly from lot to lot
  • a value is close to a regulatory threshold
  • you plan to make a nutrition claim
  • a retailer or customer requires testing

The two approaches work well together: use recipe analysis during development, and laboratory testing when you need validation.

Create Your Nutrition Facts Label With FreeFoodLabels.com

FreeFoodLabels.com lets you build a recipe, calculate its nutrition, and generate a U.S. Nutrition Facts label without creating an account. A free account lets you save your recipes and labels and use recipe costing.

Start with your current production formula, choose the best ingredient data, enter your moisture loss, processing loss, and serving details, and review the results before using the label commercially.

Create a U.S. Nutrition Facts label from your recipe. No account required.

Want to calculate product costs or come back later? Create a free account to save your recipes, labels, and costing.

Frequently Asked Questions

Can I calculate a Nutrition Facts label from a recipe?

Yes. Ingredient nutrients are totaled for the batch, adjusted for moisture loss and processing loss, and divided into servings. Accuracy depends on reliable ingredient data, correct quantities, representative processing information, and the right serving size.

Do I need laboratory testing?

Not necessarily. Database analysis is appropriate for many foods. Testing may be worthwhile when processing is hard to model, ingredients vary widely, results are near a regulatory threshold, you plan to make claims, or a customer requires it.

Can I choose any serving size?

No. FDA serving sizes are based on the Reference Amount Customarily Consumed for your product’s category. Package size can also affect how serving information must be shown.

How does cooking loss affect the label?

When water evaporates, the product weighs less but keeps its nutrients, so calories and nutrients per gram go up. That’s moisture loss. Product lost in handling is processing loss: it reduces your yield but doesn’t change nutrition per gram. Record the two separately. Losing fat, solids, or nutrient-rich liquid may require more than a simple percentage adjustment.

Does FreeFoodLabels.com generate more than the Nutrition Facts panel?

Yes. It also generates an ingredient statement, allergen declarations, and a net weight declaration. Review each against your recipe, supplier documents, and finished package.

Do I need a FreeFoodLabels.com account?

No. You can create a recipe and U.S. Nutrition Facts label without one. A free account is required to save your work or use costing.

Does FreeFoodLabels.com create Canadian labels?

Not yet. FreeFoodLabels.com currently supports U.S. nutrition calculations and labels. Canadian and other international formats are planned.

Regulatory References

Disclaimer: This article provides general information about U.S. nutrition labeling and isn’t legal or regulatory advice. Your business is responsible for the accuracy and compliance of its labels. For complex products or claims, consult a qualified food-labeling professional.