Creating an ingredient list seems simple. Take your recipe, write down the ingredients, and put them on the package.
Unfortunately, FDA ingredient labeling can become much more complicated than that.
Consider a chocolate-chip cookie containing flour, chocolate chips, butter, brown sugar, eggs, vanilla, baking powder, and salt. You can’t necessarily put “Ingredients: Flour, Chocolate Chips, Butter, Brown Sugar, Eggs, Vanilla, Baking Powder, Salt” on the package and call it finished.
The flour may contain additional ingredients. The chocolate chips probably contain several ingredients. The baking powder is itself a compound ingredient. Some ingredients may need different common or usual names. Major allergens need to be appropriately identified. And everything generally needs to appear in the correct order.
A compliant ingredient statement therefore requires you to understand not only what went into the recipe, but what is actually contained in the ingredients that went into the recipe.
This guide explains how to build an FDA ingredient statement from the ground up.
Does My Food Need an Ingredient List?
Foods fabricated from two or more ingredients generally must declare each ingredient by its common or usual name unless a specific regulatory provision or exemption applies.
Ingredients generally appear in descending order of predominance by weight. In other words, the ingredient present in the greatest amount by weight normally appears first, followed by the remaining ingredients in decreasing amounts.
For example:
INGREDIENTS: Tomatoes, Onions, Green Chile, Lime Juice, Salt, Garlic.
The ingredient statement tells consumers what the food contains. It also plays an important role in allergen labeling.
Rule #1: Ingredients Are Generally Listed in Descending Order by Weight
This is the foundation of FDA ingredient labeling.
Under 21 CFR §101.4, ingredients generally must be listed in descending order of predominance by weight.
Suppose your salsa formula contains:
| Ingredient | Weight |
| Tomatoes | 10 lb |
| Green Chile | 4 lb |
| Onions | 3 lb |
| Lime Juice | 1 lb |
| Garlic | 6 oz |
| Salt | 4 oz |
The ingredient statement would generally begin:
INGREDIENTS: Tomatoes, Green Chile, Onions, Lime Juice, Garlic, Salt.
You don’t alphabetize the ingredients, sort them by cost, arrange them according to how important they seem, or necessarily list them in the order they’re added during manufacturing.
The basic ordering principle is predominance by weight.
For a detailed explanation with calculations and recipe examples, see How to Put Ingredients in the Correct Order on a Food Label.
Use Ingredient Weight, Not Volume
Home recipes frequently use measurements such as 2 cups flour, 1 cup sugar, and ½ cup oil. But cups and tablespoons don’t establish ingredient predominance because equal volumes of different ingredients can have very different weights.
When converting a recipe into a commercial food label, convert the formulation into weights—preferably grams, ounces, pounds, or another consistent unit of mass.
Maintaining formulas by weight also makes recipe scaling, Nutrition Facts calculations, costing, production, yield calculations, and batch records much more reliable.
Rule #2: Use the Common or Usual Name
Ingredients generally must be declared by their common or usual names.
For example, use “Sugar” rather than a marketing description such as “Premium Natural Sweetener.” Likewise, use “Butter” rather than “Premium Dairy Fat.”
Marketing language isn’t a substitute for an appropriate ingredient identity.
This distinction becomes particularly important when your internal inventory names don’t match the names that belong on a consumer label.
For example:
Internal inventory name: Supplier A #48372 Dark Chocolate Drops
Label ingredient name: Semisweet Chocolate
A good ingredient-management system can maintain both.
Brand Names Usually Don’t Belong in the Ingredient Statement
Suppose you use a particular branded chocolate chip. Your ingredient statement normally shouldn’t identify the supplier’s brand as though the brand name itself were the ingredient identity.
Instead, determine the appropriate common or usual name and obtain the product’s complete ingredient declaration.
The ingredient statement describes the food. It isn’t a supplier list.
The Biggest Ingredient-List Problem: Compound Ingredients
Compound ingredients are where ingredient statements become substantially more complicated.
A compound ingredient is an ingredient that itself contains multiple ingredients. Common examples include chocolate chips, bread, mayonnaise, peanut butter, Worcestershire sauce, frosting, cookie pieces, caramel, seasoning blends, baking powder, margarine, flavored syrups, and commercial sauces.
Suppose your cookie contains semisweet chocolate chips. Those chips might contain sugar, chocolate, cocoa butter, milkfat, soy lecithin, and natural flavor.
Those component ingredients don’t simply disappear because you purchased them already combined. Applicable sub-ingredients generally need to be declared.
How Do You List Sub-Ingredients?
FDA provides two basic approaches for declaring the components of a compound ingredient.
Method 1: Parenthetical Sub-Ingredients
You can identify the compound ingredient and follow it with its component ingredients in parentheses.
For example:
INGREDIENTS: Wheat Flour, Semisweet Chocolate (Sugar, Chocolate, Cocoa Butter, Milkfat, Soy Lecithin, Natural Flavor), Butter, Brown Sugar, Eggs…
For many small food manufacturers, this is the easier approach. It preserves the identity of the purchased compound ingredient while telling the consumer what’s inside it.
Method 2: Incorporate the Components Into the Overall Ingredient List
Another permitted approach is to declare the component ingredients individually in the finished-food ingredient statement according to their predominance in the finished food.
Instead of declaring:
Semisweet Chocolate (Sugar, Chocolate, Cocoa Butter, Soy Lecithin)
you would account for the sugar, chocolate, cocoa butter, and soy lecithin at their appropriate positions in the overall ingredient statement.
This method requires adequate quantitative information about the compound ingredient’s composition. For most small manufacturers, the parenthetical method is considerably easier to maintain.
Why You Need Supplier Specifications
Suppose your recipe says “1 lb Chocolate Chips.” That isn’t enough information to build a reliable finished-product ingredient statement.
You need the supplier’s current ingredient specification or other authoritative composition information for those chocolate chips.
The same applies to bread crumbs, BBQ sauce, frosting, seasoning blends, fillings, candy pieces, baking mixes, and other purchased compound ingredients.
Depending on the ingredient and supplier, a useful commercial specification may contain the product name, ingredient declaration, allergens, nutrition data, product specifications, and supplier information.
Never Guess at Sub-Ingredients
Don’t look at chocolate chips and assume they probably contain chocolate, sugar, and cocoa butter. Obtain the actual supplier information.
One supplier’s chocolate chips might contain soy lecithin. Another might use sunflower lecithin. Another might contain milkfat.
Those differences can change the ingredient statement, allergen declaration, Nutrition Facts, and potentially product claims.
Your finished label should reflect the ingredients you’re actually purchasing and using.
Supplier Changes Can Change Your Ingredient Statement
Suppose your old chocolate chips contain:
Sugar, Chocolate, Cocoa Butter, Soy Lecithin, Vanilla.
Your new supplier’s chips contain:
Sugar, Chocolate, Cocoa Butter, Milkfat, Soy Lecithin, Natural Flavor.
Your recipe may still simply say “Chocolate Chips,” and the quantity used may be identical. Nevertheless, your finished-product ingredient statement may need to change.
More importantly, the allergen profile may change because the new ingredient contains milk.
This is why supplier changes should trigger label review.
Ingredient Statements Should Be Generated From Approved Ingredient Specifications
A robust commercial process looks like:
Supplier → Ingredient Specification → Approved Ingredient Record → Recipe → Finished Product Ingredient Statement
That’s much safer than having an employee read an ingredient bag and manually type whatever they see into the finished label.
As the number of products, ingredients, and suppliers grows, controlled ingredient data becomes increasingly important.
Example: Building a Cookie Ingredient Statement
Suppose your formula contains:
| Ingredient | Weight |
| Wheat Flour | 1,000 g |
| Semisweet Chocolate Chips | 700 g |
| Butter | 500 g |
| Brown Sugar | 450 g |
| Sugar | 300 g |
| Eggs | 250 g |
| Vanilla Extract | 20 g |
| Baking Soda | 10 g |
| Salt | 8 g |
At the top level, the ingredient order begins with wheat flour, semisweet chocolate chips, butter, brown sugar, sugar, and eggs.
Now suppose the flour contains wheat flour, malted barley flour, niacin, reduced iron, thiamin mononitrate, riboflavin, and folic acid. The chocolate chips contain sugar, chocolate, cocoa butter, milkfat, soy lecithin, and natural flavor.
A more complete ingredient statement could therefore look something like:
INGREDIENTS: Enriched Wheat Flour (Wheat Flour, Malted Barley Flour, Niacin, Reduced Iron, Thiamin Mononitrate, Riboflavin, Folic Acid), Semisweet Chocolate (Sugar, Chocolate, Cocoa Butter, Milkfat, Soy Lecithin, Natural Flavor), Butter, Brown Sugar, Sugar, Eggs, Vanilla Extract, Baking Soda, Salt.
The ingredient statement then needs to be reviewed for major food allergens.
Ingredient Lists and Major Food Allergens
Ingredient statements and allergen declarations are closely connected.
The nine major food allergens currently recognized under U.S. federal law are milk, egg, fish, Crustacean shellfish, tree nuts, peanuts, wheat, soybeans, and sesame.
Sesame became the ninth major food allergen effective January 1, 2023.
Federal law requires the food source of major allergens to be appropriately identified when they’re used as ingredients in foods subject to these requirements.
How Are Major Allergens Declared?
The food source of a major allergen must be appropriately identified. When the ingredient’s common or usual name doesn’t already identify the allergen source, this can generally be accomplished in one of two ways.
One method identifies the food source parenthetically following the ingredient. Examples include “lecithin (soy),” “flour (wheat),” and “whey (milk).”
The other method uses a separate Contains statement immediately after or adjacent to the ingredient list:
CONTAINS: Wheat, Milk, Egg.
A Contains statement isn’t mandatory in every case, but if you choose to use one, it must identify all major allergens used as ingredients that are required to be declared.
A Contains Statement Must Be Complete
Don’t write:
CONTAINS: Wheat
when the food also contains milk and egg.
FDA’s current allergen guidance states that when a Contains statement is used, it must identify all major food allergens used as ingredients in the food.
This is one reason automated allergen detection should examine the complete ingredient hierarchy rather than only the top-level recipe.
Tree Nuts, Fish, and Crustacean Shellfish Need Specificity
Simply writing “Tree Nuts” or “Fish” isn’t sufficient when more specific identification is required.
FDA requires the type of tree nut and the species of fish and Crustacean shellfish to be declared as applicable.
For example:
Contains: Almonds
rather than simply:
Contains: Tree Nuts
Likewise, an applicable fish allergen might be declared as:
Contains: Cod
rather than simply:
Contains: Fish.
Allergens Can Hide in Sub-Ingredients
Suppose your recipe contains a seasoning blend. The seasoning contains salt, garlic, sesame, and paprika. Sesame is a major allergen.
Or perhaps your recipe contains chocolate whose specification includes milkfat. Milk is a major allergen.
Or your recipe contains soy lecithin. Soybeans are a major allergen.
This is why allergen review can’t stop at the top-level recipe. It needs to examine ingredients and sub-ingredients throughout the applicable ingredient hierarchy.
Sesame Deserves Special Attention
Sesame became the ninth major U.S. food allergen effective January 1, 2023.
This matters particularly because sesame can appear inside other ingredients. FDA’s current guidance explains that when sesame is part of ingredients such as a spice mix or natural flavor, it must still be appropriately identified when major-allergen labeling requirements apply.
Sesame-derived ingredients can include sesame seeds, tahini, sesame flour, and sesame paste.
Supplier specifications should therefore be reviewed carefully.
What About “May Contain” Statements?
A statement such as “May Contain Peanuts” is an advisory allergen statement. It isn’t a substitute for declaring an allergen intentionally used as an ingredient.
If peanuts are actually in the recipe, you can’t omit them from the required ingredient/allergen labeling and simply write “May Contain Peanuts.”
A Contains statement identifies major allergens intentionally present as ingredients. A May Contain statement is voluntary advisory language addressing potential unintended allergen presence from cross-contact.
These statements serve different purposes.
Do I Have to List Added Water?
Generally, added water must be considered as an ingredient and declared in descending order of predominance by weight.
For example:
INGREDIENTS: Tomatoes, Water, Green Chile, Onions, Salt.
Processing, however, can make the treatment of water more complicated.
What If Water Evaporates During Processing?
FDA regulations specifically address water added during processing and subsequently removed.
If all water added during processing is later removed, FDA provides that it doesn’t need to be declared in the ingredient statement.
If only some of the added water is removed, don’t automatically omit all of it merely because the product loses moisture during manufacturing. The actual formulation and process need to be evaluated under the applicable rules.
This issue can arise with baked goods, sauces, confections, concentrates, and other foods that lose moisture during processing.
Reconstituted Ingredients Can Require Special Handling
Suppose you’re using concentrated fruit juice and adding water to reconstitute it, or you’re using a concentrated dairy ingredient.
FDA regulations contain specific provisions affecting reconstituted ingredients and water.
These situations shouldn’t necessarily be handled by blindly treating every item on the production recipe as an unrelated ingredient and sorting it by weight. The ingredient-statement system needs to understand what the formulation actually represents.
What Are Incidental Additives?
Not every substance associated with food manufacturing necessarily needs to appear in the ingredient statement.
FDA provides an exemption for qualifying incidental additives. These can include substances present at insignificant levels that don’t have a technical or functional effect in the finished food, provided the applicable regulatory conditions are satisfied.
Quantity alone isn’t enough.
Don’t decide, “There’s hardly any of it, so we don’t need to list it.” Determine whether the substance actually qualifies for the exemption.
Processing Aids Can Be Different From Ingredients
Certain substances used during processing can qualify as incidental additives under FDA’s regulatory framework when the applicable conditions are met.
For example, a substance may be used to assist processing and later be removed, converted to constituents normally present in the food without significantly increasing those constituents, or remain only at insignificant levels without a technical or functional effect in the finished food.
Whether a substance qualifies isn’t determined simply by what your company calls it.
A company policy saying “anything we call a processing aid doesn’t go on the label” isn’t sufficient. The regulatory criteria and actual use matter.
What About Release Agents and Pan Sprays?
This can become tricky for bakeries and confectioners.
Suppose you spray pans or molds with oil before production. Does that material become part of the finished food?
The answer depends on the circumstances. Don’t assume every substance used on manufacturing equipment is automatically an exempt processing aid. Evaluate its actual use, amount, presence in the finished food, and function under the applicable regulatory criteria.
How Do You Declare Spices?
FDA permits qualifying spices to be declared collectively as “spice” or “spices” under applicable conditions rather than requiring every individual spice to be identified by name.
For example:
INGREDIENTS: Tomatoes, Onions, Green Chile, Salt, Spices.
However, not everything people casually call a seasoning qualifies as a “spice” for FDA ingredient-labeling purposes.
Garlic and Onion Aren’t Simply “Spices” for This Purpose
This is a common source of confusion.
FDA’s regulatory definition of spice has specific boundaries. Ingredients that don’t qualify for collective spice declaration need to be declared appropriately by name.
Don’t assume that anything used to season food can be hidden under “spices.”
This distinction is especially important when ingredient statements are generated automatically from seasoning formulas.
What About Natural Flavors?
Qualifying flavor ingredients may be declared using permitted terminology such as “natural flavor” or “natural flavoring.”
FDA permits certain natural and artificial flavors to be declared collectively rather than requiring every flavor component to be individually identified.
Major-allergen requirements still apply, however.
If a natural flavor contains a major food allergen that must be declared, the allergen doesn’t disappear simply because the ingredient can otherwise be called “natural flavor.” Sesame is a particularly useful example of this interaction.
What About Artificial Flavors?
Qualifying artificial flavors can generally be declared using terms such as “artificial flavor” or “artificial flavoring” under the applicable FDA requirements.
As with natural flavors, the supplier’s specification and regulatory classification need to support the declaration you’re using.
How Do You List Food Colors?
Color additives have their own ingredient-labeling rules.
FDA-certified color additives generally must be declared by their specific or abbreviated names, such as:
FD&C Red No. 40
or:
Red 40
Certain color additives exempt from certification can be declared using permitted terminology such as “Color Added,” “Artificial Color,” or an appropriate common or usual name, depending on the applicable requirements.
Don’t treat all color additives as though they have identical declaration rules.
How Do You List Chemical Preservatives?
Chemical preservatives require additional information in the ingredient statement.
FDA requires a chemical preservative to be declared by its common or usual name together with a description of its function.
Examples can include:
Potassium Sorbate (Preservative)
Calcium Propionate (Preservative)
or appropriate functional language such as “to retard spoilage,” “a mold inhibitor,” “to help protect flavor,” or “to promote color retention,” depending on the preservative and its function.
An ingredient-statement generator therefore needs to know more than the ingredient’s weight. It also needs to know what type of ingredient it is and whether special declaration rules apply.
What About Ingredients Present at 2% or Less?
FDA regulations provide special ordering flexibility for qualifying ingredients present at 2% or less by weight.
These ingredients can, under the applicable conditions, be listed after a statement such as:
CONTAINS 2% OR LESS OF:
For example:
INGREDIENTS: Wheat Flour, Sugar, Butter, Chocolate, Eggs, Contains 2% or Less of: Salt, Baking Soda, Natural Flavor.
The provision can simplify ingredient ordering, but it doesn’t mean ingredients below 2% can simply be omitted.
Sub-ingredients, allergens, preservatives, colors, and other applicable requirements still need to be addressed.
How Do You Calculate the 2% Threshold?
Use the actual formulation weights.
The basic calculation is:
Ingredient Weight ÷ Total Formula Weight × 100
If a 100-kilogram formulation contains 1.5 kilograms of an ingredient, that ingredient represents 1.5% of the formulation.
An ingredient used at 2.5 kilograms represents 2.5%.
Don’t estimate the threshold visually from the recipe. Calculate it from the formulation.
What About Variable Fats and Oils?
FDA regulations provide limited flexibility for certain fat and oil ingredients when specified conditions are met.
For example, permitted wording can sometimes identify a variable oil blend using language such as:
Vegetable Oil Shortening (Contains One or More of the Following: Cottonseed Oil, Palm Oil, Soybean Oil)
This isn’t general permission to use “and/or” whenever your purchasing department changes suppliers or substitutes ingredients.
The regulatory conditions need to be satisfied.
Can I Just Say “Vegetable Oil”?
Don’t assume “vegetable oil” alone is always sufficient.
Applicable labeling provisions can require identification of the particular oils involved. Depending on the formulation and applicable rules, you may see declarations that identify the specific oils within a vegetable-oil ingredient or blend.
Again, accurate supplier specifications are essential.
Ingredient Statements Should Change When the Recipe Changes
Suppose your original recipe contains 500 grams of sugar and 450 grams of butter. Sugar appropriately appears before butter.
Then you reformulate the product to use 400 grams of sugar and 500 grams of butter. The ingredient order may need to change.
That’s why ingredient statements shouldn’t be treated as static blocks of text. Ideally, they’re generated or at least reevaluated from the current approved formulation.
Ingredient Statements Should Be Version Controlled
Supplier changes and formulation changes create another important requirement: history.
Suppose Recipe Version 1 uses soy lecithin and Recipe Version 2 switches to sunflower lecithin. If your packaging still says “Soy Lecithin,” you have a problem.
A well-controlled system connects:
Formula Version → Ingredient Specifications → Ingredient Statement → Allergen Statement → Nutrition Facts → Approved Label Version
When one of those elements changes, the system should identify whether the label needs review.
Supplier ingredient specifications should also be version controlled. If a supplier changes the composition of an ingredient, don’t simply overwrite the old specification. Products manufactured before the change may have used the old version, while later products use the new one.
That history can become important during allergen investigations, complaints, recalls, audits, and label reviews.
Don’t Copy Ingredient Lists From Similar Products
Suppose you’re making chocolate brownies and find a competing brownie with a professional-looking ingredient statement.
Don’t copy it.
Their flour, chocolate, butter, flavors, leavening, oils, inclusions, suppliers, and formulation may differ from yours.
An ingredient statement needs to describe your food, not a similar food.
Don’t Copy Supplier Labels Without Understanding Them
Supplier ingredient declarations are extremely useful, but remember that a supplier’s ingredient statement describes the supplier’s product.
You still need to incorporate that information correctly into your finished food.
If your finished product contains five compound ingredients, you may need to correctly manage the ingredient structures of all five.
Example: Chocolate Bar With Inclusions
Suppose your chocolate bar contains:
| Ingredient | Weight |
| Milk Chocolate | 900 g |
| Roasted Almonds | 100 g |
The milk chocolate contains sugar, cocoa butter, chocolate, milk powder, soy lecithin, and vanilla.
A possible ingredient structure might therefore be:
INGREDIENTS: Milk Chocolate (Sugar, Cocoa Butter, Chocolate, Milk Powder, Soy Lecithin, Vanilla), Roasted Almonds.
Then review the formulation for major allergens. Depending on the actual ingredients, these can include milk, soybeans, and almonds.
Example: Granola
Suppose your granola contains rolled oats, honey, almonds, canola oil, dried cranberries, brown sugar, and cinnamon.
The dried cranberries themselves contain cranberries, sugar, and sunflower oil.
The finished ingredient statement therefore needs to account for those components. Depending on the actual formulation weights, it might look something like:
INGREDIENTS: Rolled Oats, Honey, Almonds, Canola Oil, Dried Cranberries (Cranberries, Sugar, Sunflower Oil), Brown Sugar, Cinnamon.
The actual order must come from the formulation, not from this example.
Example: Commercial Bread Used as an Ingredient
Suppose you manufacture bread pudding and your recipe includes purchased bread.
The bread itself contains wheat flour, water, yeast, sugar, and salt.
You generally can’t reduce the finished-product declaration to:
INGREDIENTS: Bread, Milk, Eggs, Sugar.
The applicable components of the bread need to be accounted for under the compound-ingredient rules.
Ingredient Statements and Nutrition Facts Should Use the Same Recipe
This sounds obvious, but it’s surprisingly easy for a small food company to end up with Recipe A used for manufacturing, Recipe B used for Nutrition Facts, and Recipe C used for the ingredient statement.
That’s how label inconsistencies develop.
Ideally, one controlled formulation drives production, Nutrition Facts, the ingredient statement, allergen identification, and recipe costing.
This is one of the major advantages of generating label information directly from structured recipe data.
Ingredient Statements and Allergen Detection Should Be Connected
Consider whey protein concentrate. A person manually reviewing a recipe may not immediately translate “whey” into the food-source allergen “milk.”
Software can assist by mapping terms such as whey to milk, semolina to wheat, tahini to sesame, albumen to egg, and soy lecithin to soybeans.
Automated allergen detection can provide a valuable safety check, but it should be treated as assistance rather than as a substitute for accurate supplier specifications and manufacturer review.
Ingredient Databases Need Synonyms
Automated labeling becomes more challenging because the same underlying ingredient or allergen source can appear under many names.
For example, an allergen-detection system may need to recognize whey, whey powder, whey protein concentrate, and whey protein isolate as potentially indicating milk.
Likewise, ingredient normalization can help determine whether differently named database records represent the same or related underlying foods.
High-quality ingredient data is therefore central to reliable automated label generation.
Where Does the Ingredient List Go?
FDA labeling rules govern where required information appears and require it to be prominent and conspicuous.
The ingredient statement is commonly placed on the information panel along with other required information, although label configuration and applicable placement rules matter.
It commonly appears near the Nutrition Facts panel, allergen declaration, and name and address of the manufacturer, packer, or distributor.
What Should the Heading Say?
Ingredient statements are commonly introduced with:
INGREDIENTS:
The declaration should be easy for consumers to locate and read.
Does the Ingredient List Need a Minimum Font Size?
FDA’s general labeling regulations include type-size, prominence, and conspicuousness requirements for required label information.
Under the general rule in 21 CFR §101.2, required information appearing on the information panel generally must use letters or numbers at least 1/16 inch in height, measured by the lowercase “o,” unless an applicable exception or more specific requirement applies.
Don’t design an ingredient statement around the question, “What’s the smallest text my printer can physically reproduce?”
Legibility and regulatory requirements both matter.
Common FDA Ingredient-List Mistakes
Mistake #1: Listing Ingredients in Recipe Order
Your manufacturing instructions might say to add butter, then sugar, then flour. That isn’t necessarily the ingredient-statement order. The general rule is predominance by weight.
Mistake #2: Using Volume Instead of Weight
Cups and tablespoons don’t determine ingredient predominance. Convert the formulation to weights.
Mistake #3: Forgetting Sub-Ingredients
Chocolate chips, bread, frosting, mayonnaise, seasoning blends, baking mixes, and many other purchased foods contain their own ingredients.
Mistake #4: Guessing Supplier Ingredients
Use current supplier specifications rather than assumptions.
Mistake #5: Forgetting Allergens Inside Sub-Ingredients
Milk in chocolate, sesame in a seasoning blend, or soy in lecithin can affect allergen labeling.
Mistake #6: Using “May Contain” Instead of Declaring an Intentional Ingredient
Advisory allergen labeling isn’t a substitute for declaring allergens intentionally used as ingredients.
Mistake #7: Calling Everything “Spices”
FDA’s regulatory definition of spice isn’t simply “anything used to season food.”
Mistake #8: Forgetting Added Water
Added water generally needs to be considered in the ingredient statement, subject to the applicable rules for water removed during processing and other special situations.
Mistake #9: Forgetting Preservative Functions
Chemical preservatives generally require an appropriate description of their function in addition to their common or usual name.
Mistake #10: Treating All Colors the Same
Certified and certification-exempt color additives have different declaration requirements.
Mistake #11: Never Updating the Ingredient Statement
Recipe and supplier changes can change the label.
Mistake #12: Manually Maintaining Different Versions Everywhere
If your recipe, Nutrition Facts, ingredient statement, allergen declaration, website, and product specification all contain separately maintained information, inconsistencies become increasingly likely.
A Practical Ingredient-Statement Workflow
A useful workflow for a small food manufacturer is:
- Enter every ingredient in the current approved recipe.
- Record ingredient quantities by weight.
- Obtain current supplier specifications for compound ingredients.
- Record applicable sub-ingredients.
- Evaluate processing aids and incidental additives.
- Identify spices, flavors, colors, preservatives, and other special declarations.
- Sort top-level ingredients by predominance by weight.
- Generate the appropriate compound-ingredient declarations.
- Identify major allergens throughout the ingredient hierarchy.
- Generate the ingredient statement.
- Generate or review the allergen declaration.
- Compare the finished statement against the actual formulation and current supplier specifications.
- Approve and version-control the label.
This is much more reliable than manually typing a new ingredient statement each time a label is created.
FDA Ingredient List Checklist
Before approving a label, verify the following.
Formula
- ☐ Current approved formula used
- ☐ All ingredients included
- ☐ Ingredient quantities recorded by weight
- ☐ Ingredients correctly ordered
Ingredient Names
- ☐ Common or usual names used
- ☐ Brand names removed where inappropriate
- ☐ Ingredient identities match current supplier specifications
Compound Ingredients
- ☐ All compound ingredients identified
- ☐ Current supplier specifications obtained
- ☐ Sub-ingredients declared appropriately
- ☐ Nested sub-ingredients reviewed
Special Ingredients
- ☐ Added water evaluated
- ☐ Water removed during processing evaluated where applicable
- ☐ Reconstituted ingredients reviewed
- ☐ Spices reviewed
- ☐ Natural flavors reviewed
- ☐ Artificial flavors reviewed
- ☐ Colors reviewed
- ☐ Preservatives reviewed
- ☐ Processing aids reviewed
- ☐ Incidental additives reviewed
- ☐ Variable fats and oils reviewed
Allergens
- ☐ Milk reviewed
- ☐ Egg reviewed
- ☐ Fish reviewed
- ☐ Crustacean shellfish reviewed
- ☐ Tree nuts reviewed
- ☐ Peanuts reviewed
- ☐ Wheat reviewed
- ☐ Soybeans reviewed
- ☐ Sesame reviewed
- ☐ Sub-ingredients checked for allergens
- ☐ Specific tree nut, fish, and shellfish identities handled appropriately
- ☐ Contains statement complete if used
Finished Label
- ☐ Ingredient heading present
- ☐ Statement placed appropriately
- ☐ Text legible
- ☐ Current approved label version used
- ☐ Nutrition Facts based on the same current formula
- ☐ Allergen declaration based on the same current formula
How FreeFoodLabels.com Can Help Create an Ingredient Statement
An ingredient statement shouldn’t have to be manually recreated every time a recipe changes.
Ideally, the process begins with the same recipe used to calculate the Nutrition Facts.
With FreeFoodLabels.com, the goal is to make the recipe the central source of product information. The recipe already contains ingredients, ingredient quantities, and ingredient composition. That information can support Nutrition Facts, ingredient ordering, sub-ingredients, allergen identification, and recipe costing.
That’s a much better workflow than separately maintaining one recipe, one Nutrition Facts spreadsheet, one ingredient statement, one allergen list, and one costing spreadsheet.
Change the recipe, and the related product information can be reevaluated.
Why Automatic Ingredient Statements Are Harder Than They Look
Sorting ingredients by weight is relatively easy.
The difficult part is understanding what each ingredient actually contains.
Consider chocolate chips:
Chocolate Chips → Sugar + Chocolate + Cocoa Butter + Milkfat + Soy Lecithin + Natural Flavor
Now suppose one of those components is itself a compound ingredient.
The software needs to understand the ingredient hierarchy and then evaluate common or usual names, allergens, parenthetical declarations, ingredient order, and special regulatory declarations.
That’s why accurate ingredient data matters so much.
Ingredient Statements Should Change With the Recipe
Suppose you reformulate your granola.
The old formula results in the order:
Oats, Honey, Almonds, Sugar, Oil
The new formula results in:
Oats, Honey, Oil, Almonds, Sugar
If the actual formulation weights support the new order, the ingredient statement should change.
Likewise, if you remove almonds, both the ingredient statement and allergen declaration can change.
A recipe-based labeling system makes these relationships much easier to manage.
Frequently Asked Questions About FDA Ingredient Lists
Do food ingredients have to be listed in order?
Yes. Ingredients generally must be listed in descending order of predominance by weight, subject to applicable special provisions.
Do I list ingredients by raw weight or finished weight?
Ingredient predominance is generally based on the weight of ingredients used in formulating the food, subject to specific provisions such as those involving added water, reconstitution, and other special circumstances.
Can I list ingredients alphabetically?
Not as a substitute for the required order. Ingredients generally need to be listed according to predominance by weight.
Do I have to list ingredients inside other ingredients?
Generally, the components of compound ingredients need to be appropriately declared unless a specific regulatory provision or exemption applies.
Do I have to list water?
Added water generally must be declared and appropriately considered in the ingredient order, subject to applicable provisions involving water removed during processing and reconstitution.
Can I just write “spices”?
Qualifying spices can be declared collectively using permitted terminology, but not every ingredient commonly thought of as a seasoning qualifies.
Can I write “natural flavor”?
Qualifying flavor ingredients can be declared using permitted natural-flavor terminology. Major-allergen and other applicable labeling requirements still apply.
How do I list preservatives?
Chemical preservatives generally need to be identified by their common or usual name together with an appropriate description of their function.
Do I need to list food colors?
Applicable color additives must be declared according to FDA’s color-labeling requirements. Certified colors generally require specific identification, such as Red 40.
What are the nine major food allergens?
Milk, egg, fish, Crustacean shellfish, tree nuts, peanuts, wheat, soybeans, and sesame.
Do allergens have to be listed twice?
Not necessarily. Federal allergen-labeling requirements can generally be satisfied through appropriate identification in the ingredient list or an appropriate Contains statement, depending on the circumstances.
Is “May Contain” the same as a Contains statement?
No.
CONTAINS: Milk, Wheat identifies major allergens intentionally present as ingredients.
MAY CONTAIN: Peanuts is voluntary advisory language concerning possible unintended allergen presence from cross-contact.
They serve different purposes.
Can I use my supplier’s ingredient statement?
Supplier specifications are an important source for the composition of purchased ingredients, but you still need to incorporate that information correctly into your finished-product ingredient statement.
Do I need to change my ingredient statement when I change suppliers?
Possibly. If the new supplier’s product has different ingredients, sub-ingredients, allergens, or required declarations, your finished label may need to change.
Can software automatically create an ingredient statement?
Software can greatly simplify ingredient ordering, sub-ingredient expansion, and allergen identification when it has accurate recipe and ingredient data. The manufacturer should still review the resulting statement against current supplier specifications and applicable labeling requirements.
The Bottom Line
A correct ingredient statement begins with an accurate recipe, but it doesn’t end there.
You also need to understand what’s inside the ingredients in that recipe.
The process is essentially:
Recipe → Ingredient Weights → Supplier Specifications → Sub-Ingredients → Common or Usual Names → Special Ingredient Rules → Ingredient Order → Allergen Review → Finished Ingredient Statement
The basic ordering rule is simple: ingredients are generally listed in descending order of predominance by weight.
The complexity comes from everything underneath that rule—compound ingredients, sub-ingredients, allergens, water, spices, flavors, colors, preservatives, incidental additives, processing aids, supplier changes, and formula changes.
That’s why the best ingredient-labeling system doesn’t treat the ingredient statement as a block of text. It treats it as an output of a controlled recipe and ingredient database.
When the recipe changes, the ingredient statement should be reevaluated. When a supplier specification changes, the ingredient statement should be reevaluated. When an allergen changes, the label should be reevaluated.
That approach makes ingredient labeling substantially easier to manage and much harder to accidentally get wrong.
References / Sources
Electronic Code of Federal Regulations — 21 CFR §101.4, Food; Designation of Ingredients
The principal federal regulation governing ingredient declaration, descending order of predominance, compound ingredients, incidental additives, water, variable fats and oils, and related ingredient-labeling requirements.
Electronic Code of Federal Regulations — 21 CFR §101.22, Foods; Labeling of Spices, Flavorings, Colorings and Chemical Preservatives
Federal requirements concerning spices, flavors, color additives, and chemical preservatives.
Electronic Code of Federal Regulations — 21 CFR §101.2, Information Panel of Package Form Food
Federal requirements concerning placement, prominence, and general type-size requirements for required information on packaged foods.
U.S. Food and Drug Administration — Types of Food Ingredients
FDA overview explaining ingredient labeling, descending order by weight, incidental-additive exemptions, colors, flavors, preservatives, and other ingredient categories.
U.S. Food and Drug Administration — Food Labeling Guide
FDA guidance covering ingredient statements, compound ingredients, water, colors, flavors, preservatives, and other food-labeling subjects. Because this guide is older, current regulations and newer FDA guidance should be consulted where available.
U.S. Food and Drug Administration — Food Allergies
FDA’s current overview of the nine major food allergens and allergen-source declaration requirements.
U.S. Food and Drug Administration — Questions and Answers Regarding Food Allergen Labeling (Edition 5, January 2025)
Current FDA guidance addressing major-allergen labeling, Contains statements, ingredient declarations, and other allergen-labeling questions.
U.S. Food and Drug Administration — The FASTER Act: Sesame Is the Ninth Major Food Allergen
FDA information concerning sesame and the allergen-labeling requirements effective January 1, 2023.
Disclaimer: This article provides general information about U.S. food ingredient labeling and isn’t legal or regulatory advice. Ingredient declarations can involve product-specific issues including standards of identity, compound ingredients, incidental additives, processing aids, flavors, colors, preservatives, allergens, water added or removed during processing, reconstituted ingredients, and other specialized requirements. Manufacturers are responsible for ensuring that their labels accurately describe their products and comply with current federal, state, and other applicable requirements.
